Sorry, this article is only available in Русский.
 |
 |
UDC 622.788.3
THE STUDY OF INFLUENCE AN OPENING ANGLE, AN ANGLE OF INCLINATION AND A ROTATION SPEED OF A CONICAL PELLETIZER ON SINTER’S CHARGE GRANULES SPEED
Dorogoy Evgeniy Vladimirovich1, Semiryagin Sergey Vladimirovich2, Kuznetsov Denis Yurevich3
1Donbas State Technical University, Assistant of the «MFM» chair
2Donbas State Technical University, Ph.D., Associated Professor, Vice President for Academic Affairs
3Donbas State Technical University, Ph.D., Associated Professor, Head of «GM&C» Chair
1Donbas State Technical University, Assistant of the «MFM» chair
2Donbas State Technical University, Ph.D., Associated Professor, Vice President for Academic Affairs
3Donbas State Technical University, Ph.D., Associated Professor, Head of «GM&C» Chair
Abstract
In the article, based on review of computer simulation results, the impact of structural and technological parameters of the cone pelletizer as opening angle, angle of inclination and a rotation speed on sinter’s charge granules speed has been considered.
Article reference:
The study of influence an opening angle, an angle of inclination and a rotation speed of a conical pelletizer on sinter’s charge granules speed // Modern technics and technologies. 2014. № 2 [Electronic journal]. URL: https://technology.snauka.ru/en/2014/02/3120
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: