Sorry, this article is only available in Русский.
 |
 |
UDC 621.91.02
THE METHOD OF COMBINED MACHINING: THE FORMING OF SURFACE ROUGHNESS OF NON-RIGID SMOOTH HOLLOW CYLINDER PARTS IN THREE STAGES
Vetrova Ekaterina Andreevna1, Lebedev Petr Andreevich2, Adeev Aleksandr Segeevich3
1University of Mechanical Engineering, Senior Teacher of the Department "Automated machine systems and tools"
2University of Mechanical Engineering, Senior Teacher of the Department "Automated machine systems and tools"
3University of Mechanical Engineering, Assistant of the Department "Automated machine systems and tools"
1University of Mechanical Engineering, Senior Teacher of the Department "Automated machine systems and tools"
2University of Mechanical Engineering, Senior Teacher of the Department "Automated machine systems and tools"
3University of Mechanical Engineering, Assistant of the Department "Automated machine systems and tools"
Abstract
This article describes the process of forming of surface roughness of non-rigid smooth hollow cylinder parts while combined machining by cutting and surface plastic deformation. The magnitude of surface roughness depends on shape and size of deform elements, magnitude of axial feed, radial forcing, number of stressing cycles, physical and mechanical parameters of the material, etc.
Keywords: combined machining, deformation zone, deforming element, microgeometry, non-rigid hollow cylinder parts, plastic deformation, roughness
Article reference:
The method of combined machining: the forming of surface roughness of non-rigid smooth hollow cylinder parts in three stages // Modern technics and technologies. 2014. № 5 [Electronic journal]. URL: https://technology.snauka.ru/en/2014/05/3562
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: