Sorry, this article is only available in Русский.
 |
 |
UDC 621.91.02
THE INFLUENCE OF AN ERROR CROSS-SECTIONAL SHAPE OF NON-RIGID PARTS OF CLASS «HOLLOW CYLINDERS» TO CHANGE THE DEPTH OF CUTTING IN THE COMBINED MACHINING BY CUTTING AND SURFACE PLASTIC DEFORMATION
Vetrova Ekaterina Andreevna1, Lebedev Petr Andreevich1, Adeev Aleksandr Segeevich1
1University of Mechanical Engineering, Senior Teacher of the Department “Automated machine systems and tools”
1University of Mechanical Engineering, Senior Teacher of the Department “Automated machine systems and tools”
Abstract
This article deals with the influence of an error cross-sectional shape of non-rigid parts of class "hollow cylinders" to change the depth of cutting in the combined machining by cutting and surface plastic deformation. Changing the depth of cutting results in a change of cutting force, which adversely affects the accuracy of the parameters of the combined machining of the non-rigid parts oh this class.
Keywords: combined machining, cross section, cutting force, depth of cutting, eccentricity, non-rigid parts of class "hollow cylinders", options accuracy
Article reference:
The influence of an error cross-sectional shape of non-rigid parts of class «hollow cylinders» to change the depth of cutting in the combined machining by cutting and surface plastic deformation // Modern technics and technologies. 2014. № 12 [Electronic journal]. URL: https://technology.snauka.ru/en/2014/12/5219
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: