Sorry, this article is only available in Русский.
 |
 |
UDC 671.621
THE CONTRASTIVE ANALYSIS OF MANUAL CALCULATION METHOD OF THE CENTRIFUGAL PUMP IMPELLER USING AUTOMATIC CALCULATION IN THE ANSYS SOFTWARE ENVIRONMENT
Dorofeev Egor Alekseevich1, Ovsjannikov Andrey Yurevich2
1Omsk State Technical University, student department of hydromechanics and transport machinery
2Omsk State Technical University, student department of hydromechanics and transport machinery
1Omsk State Technical University, student department of hydromechanics and transport machinery
2Omsk State Technical University, student department of hydromechanics and transport machinery
Abstract
Computer modeling is widely used at present time. Therefore it is raised the question about certainty of results received by automatic calculation in software environment. This article is devoted to comparison of the calculation results of the centrifugal pump impeller received by manual calculation and design by the ANSYS program. Main purpose of article is the divergence assessment of the geometrical and dynamic parameters of the centrifugal pump impeller received by different ways of calculation.
Keywords: ANSYS software, calculation method, centrifugal pump, computer modeling, finite elements method, impeller, meridian section
Article reference:
The contrastive analysis of manual calculation method of the centrifugal pump impeller using automatic calculation in the ANSYS software environment // Modern technics and technologies. 2016. № 5 [Electronic journal]. URL: https://technology.snauka.ru/en/2016/05/10157
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: