Sorry, this article is only available in Русский.
 |
 |
UDC 621.6.09
ACCOUNTING FOR THE EFFECT OF THE STIFFNESS OF THE MACHINE SYSTEM ON THE MUTUAL POSITION OF THE WORKPIECE AND TOOL
Aymurzina Alina Dmitrievna
Naberezhnye Chelny branch «Kazan National Research Technical University named after A.N.Tupolev- KAI»
student
Naberezhnye Chelny branch «Kazan National Research Technical University named after A.N.Tupolev- KAI»
student
Abstract
Modern realities of production require the effectiveness of automated control of the accuracy of the shaping of parts at the stages of technological design. This is possible only with the use of simulation mathematical modeling. The very modeling of the processes of formation is based on smaller models of processes that take place when removing a part of the material. In this article, we propose an approach to take into account the influence of the stiffness of the machine system in the simulation of the mutual position of the workpiece and the tool, in the modeling of blade machining.
Keywords: cutting force, modeling of the forming process, rigidity of the machine system
Article reference:
Accounting for the effect of the stiffness of the machine system on the mutual position of the workpiece and tool // Modern technics and technologies. 2017. № 4 [Electronic journal]. URL: https://technology.snauka.ru/en/2017/04/13039
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: