Sorry, this article is only available in Русский.
 |
 |
UDC 629.113
STUDY OF THE CONDITIONS OF WORK OF ROLLING BEARINGS TO OPTIMIZE LUBRICATION
Gordivskiy Viktor Nikolaevich1, Gumelev Vasiliy Yuryevich2, Cherevatenko Vladimir Vasilievich3
1Ryazan high airborne command school (the military institute) name of the General of the army V. Margelov, candidate of technical Sciences, associate professor
2Ryazan high airborne command school (the military institute) name of the General of the army V. Margelov, candidate of technical Sciences
3Ryazan high airborne command school (the military institute) name of the General of the army V. Margelov, cadet
1Ryazan high airborne command school (the military institute) name of the General of the army V. Margelov, candidate of technical Sciences, associate professor
2Ryazan high airborne command school (the military institute) name of the General of the army V. Margelov, candidate of technical Sciences
3Ryazan high airborne command school (the military institute) name of the General of the army V. Margelov, cadet
Abstract
Studies of working conditions tapered roller
bearings that are used in wheel hubs of the car, showed that these conditions are not strained, and the impact on the performance of the bearings of dynamic factors slightly. Load distribution in the bearing rolling largely depends on the size of the clearance between the body of the rolling elements and cage.
Article reference:
Study of the conditions of work of rolling bearings to optimize lubrication // Modern technics and technologies. 2014. № 1 [Electronic journal]. URL: https://technology.snauka.ru/en/2014/01/2861
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: