Sorry, this article is only available in Русский.
UDC 621.002.2 + 621:681.3
THE FLOWCHARTS FOR DETERMINATION OF DEVIATION FROM ROUNDNESS
Vysogorets Ya.V.1, Chemborisov N.A.2
1Branch of the Federal State Budget Educational Institution of Higher Professional Education «South-Ural State University» (NRU) Miass», Senior lecturer of the sub-department of «Technology of Machinery Production»
2Branch of the Federal State Budget Educational Institution of Higher Professional Education «South-Ural State University» (NRU) Miass», Doctor of technical sciences, Professor, Dean of the Miass «Machinebuilding Faculty»
1Branch of the Federal State Budget Educational Institution of Higher Professional Education «South-Ural State University» (NRU) Miass», Senior lecturer of the sub-department of «Technology of Machinery Production»
2Branch of the Federal State Budget Educational Institution of Higher Professional Education «South-Ural State University» (NRU) Miass», Doctor of technical sciences, Professor, Dean of the Miass «Machinebuilding Faculty»
Abstract
The paper describes flowcharts for deviation from roundness determination by two actual for contemporary Russian machine-building methods.
Article reference:
The flowcharts for determination of deviation from roundness // Modern technics and technologies. 2015. № 4 [Electronic journal]. URL: https://technology.snauka.ru/en/2015/04/6498
View this article in Russian
© If you have found a violation of copyrights please notify us immediately by e-mail or feedback form.
Contact author (comments/reviews)
Write comment
You must authorise to write a comment.
Если Вы еще не зарегистрированы на сайте, то Вам необходимо зарегистрироваться: